Compressors, pumps, generators and loud process equipment can produce noise above occupational safety limits. OPTERM modular acoustic solutions provide 25-40 dB(A) noise reduction, include ventilation integration and open easily for maintenance.
We control industrial noise without compromising operational comfort. OPTERM acoustic solutions are designed for each piece of equipment's operating characteristics and geometry. Both our highly flexible acoustic insulation jackets and our acoustic enclosure systems with integrated silencers combine high sound-damping performance with optimal ventilation balance and uninterrupted maintenance access.
Request a Quote
The combination of a steel outer face, mineral wool filling and a perforated steel inner face delivers effective noise reduction across a wide frequency spectrum; ventilation and maintenance access are part of the design.
Effective noise reduction across a wide frequency spectrum with the steel outer face + mineral wool + perforated steel inner face combination.
The panel-based structure is installed around the equipment; individual panels open for maintenance. The equipment does not need to be moved.
Silenced inlet/outlet air ducts meet the equipment's thermal requirements and keep the enclosure temperature under control.
Operation windows, emergency doors and cable/pipe penetrations are integrated with acoustic sealing.
Tested to EN ISO 11546 and TS EN ISO 11957 standards; supports staying below the 85 dB(A) limit.
Prefabricated panel system; requires no lifting equipment. Typical installation takes 1-3 days.
Rotating equipment, pressurized systems and high-flow air/gas streams are the main sources of noise. Custom solutions are produced for all of these sources.
Request a Site Audit
Noise consists of irregular pressure fluctuations travelling through air. Porous insulation materials (foam-based and fiber-based) absorb sound by converting acoustic energy into heat through the friction of the sound wave with the air inside the pores. This absorption performance depends on the material's porosity, flow resistance, thickness and skeleton density, and generally increases with frequency.
The mineral wool OPTERM uses as panel filling is selected for high porosity (95% and above) to provide effective absorption across a wide frequency band. As panel thickness increases, absorption at low frequencies (such as engine and compressor rumble) also improves; that is why the 50/100/150 mm options are chosen according to the equipment's frequency characteristics.
Expresses how much of the material volume is air voids; high porosity lets more sound energy enter the material and be dissipated.
The friction sound encounters while passing through the pores; correctly chosen flow resistance absorbs the energy inside rather than reflecting it.
The absorption coefficient generally increases with frequency; that is why panel thickness is optimized for the equipment's dominant noise frequency.
In line with EN ISO 11546, TS EN ISO 11957 and ISO 15667 references, panel thickness and ventilation capacity are determined by the target sound level and site conditions.
25-40 dB(A) (design and frequency dependent)
Steel outer + mineral wool + perforated steel inner; 50/100/150 mm thickness
Acoustically silenced inlet/outlet duct; fan option
Steel frame + lock-fixed panels; vibration-isolated floor profile
Waterproof cladding, UV-resistant surface, rain-hooded ventilation
EN ISO 11546, TS EN ISO 11957, ISO 15667
Depending on panel thickness and design, a 25-40 dB(A) reduction is achieved. A compressor emitting 95 dB(A) can be brought down to 55-70 dB(A) with the right solution.
Thanks to the modular panel design, opening the relevant panel is enough; the whole system does not need to be dismantled.
With a correctly sized ventilation system, the internal temperature is kept under control.
No. The modular panels are installed around the equipment without moving it.
Under noise regulations, engineering measures are mandatory for noise above 85 dB(A).
Penetration points with acoustic sealing details are integrated into the panel design.
Yes. Outdoor designs are made with waterproof cladding and a UV-resistant surface.
ATEX zones involve special requirements. Each project is evaluated individually.
After installation, a field sound measurement is taken and compared with the design IL value; a report is provided.
Yes. RAL color options and logo printing are available.
Yes. Turnkey design, manufacturing and installation service is provided.
Equipment type, current sound level, target sound level and equipment dimensions are sufficient.
Türkçe